Besides your Nuance Audio™ Glasses, the standard package includes a Nuance Audio™ Glasses case, cloth, a charging pad and cable. The remote control is not included but can be purchased separately.
< Back
Accessories
Which accessories are included in the packaging?
Are Nuance Audio™ Glasses accessories also covered by warranty?
Yes, Nuance Audio™ Glasses accessories, so the Charging Pad and the Remote Control, are also covered by a one-year warranty.
Which accessories can be purchased separately?
The charging pad and remote control can be purchased separately.
What is the Charging Pad for?
The Nuance Audio™ Glasses Charging Pad is an accessory designed to wirelessly charge your glasses. When choosing where to locate the Charging Pad, please make sure to avoid placing it on metallic surfaces.
To use the charging pad, first connect the USB-C Cable. Plug one end of the USB-C cable (included in the packaging) into the USB-C socket of the Charging Pad. Then connect the other end to a wall plug or adapter (minimum 5v).
Fold your glasses and place them upside down on the Charging Pad.
The magnets inside the pad help position the Glasses correctly for optimal charging.
Charging Pad LED Indications:
Orange LED: Charging is in progress.
Green LED: Glasses are fully charged (at least 96%).
Battery Level Indications:
When you pick up the glasses or place them on the Charging Pad, the LED will indicate the battery level for a few seconds:
Red LED: Battery level is between 0% and 20%.
Green LED: Battery level is above 20%.
What is the remote control for?
With the Remote Control, you can:
• Switch between "frontal" (focus amplification on sounds coming from the front) and "all-around" (amplify sounds or speech from all directions) Audio Mode.
• Change the volume level.
Please recall that the usage of the Remote Control doesn’t exclude the use of the App. Indeed, you may use the Remote Control for basic features changes (i.e. volume), while relying on the App for all advanced features.
How do I pair the remote control to my Nuance Audio™ Glasses?
To pair the Remote Control to your Glasses, follow these steps:
• If it is your first pairing, remember to pull out the tab before proceeding.
• When the Glasses are off, press & hold the button on the glasses until the blue LED blinks to enter pairing mode. The Glasses will remain in pairing mode for 3 minutes.
• Press and hold the side button on the Remote Control until the blue LED blinks to enter pairing mode. The Remote will remain in pairing mode for 3 minutes.
• Hold the Remote Control next to your glasses.
• A blue LED on both devices and a "Success" audio chime played on the glasses will indicate that pairing is completed successfully.
Can the same remote control be paired with more than one pair of Nuance Audio™ Glasses?
Yes. The remote control can be paired with up to two pairs of Nuance Audio™ Glasses and will control the one that is worn.
